University of Maryland researchers have created a novel technique for nanoscale imaging that may lay the foundation for a new generation of microscopes, other optical devices and sensors, and even ultra-compact electronics.
In a study published in the Feb. 5, 2013 issue of the journal Nature Communications, the UMD research team describes a novel technique for imaging far below the diffraction limit by using a particle that is much smaller than the wavelength of light as an optical probe. The particle is manipulated with high precision using an inexpensive microfluidic device. The breakthrough has enabled the researchers to capture nanoscale measurements with a spatial accuracy of 12 nanometers.
Finding ways to see, position, measure, and accurately manipulate nanoscale objects has been an ongoing challenge for researchers seeking to develop the next generation of ultra-compact electronics, sensors and optical devices. Even the most advanced conventional microscopes are limited by diffraction of the shortest wavelength of visible light, about 400 nanometers, rendering them unable to produce images or measurements of objects that are significantly smaller than this threshold.
Researchers have been trying to solve this problem by using "reporting probes." A near-field scanning optical microscope (NSOM), for example, is equipped with a probe attached to a fine mechanical tip that can scan a nanoscale object and create an image based on the electromagnetic field it generates. But NSOMs are complex, delicate and expensive pieces of equipment, and the presence of the tip disturbs the interaction between the probe and the sample, distorting the image.
Quantum Dots: Nanoscopic Spotlights in a Microscopic River
At room temperature, quantum dots can emit single photons of light that can be tuned to a desired wavelength. This makes them ideal probes for examining nanostructures smaller than the visible light threshold. Positioned close to a nanoscale object, the quantum dot becomes a sort of spotlight that amplifies what the microscope alone cannot see. However, such positioning is hard to do because it is difficult to capture and scan a single quantum dot over another nanoscale object.
The UMD team's solution lies in a microfluidic device that manipulates and positions quantum dots using precision flow control. A computer algorithm analyzes the dots dispersed inside, selecting one to be the reporting probe. As the microfluidic device creates a fluid flow, the targeted dot begins to move. An image-guided feedback process continually tracks the dot's location and adjusts the flow accordingly. For example, if the dot is observed to be to the northwest of its desired location, a southeast flow is created to move it into place.
"In other particle manipulation techniques—for example laser tweezers—the force applied to a particle scales with its volume," explains co-author Benjamin Shapiro, an associate professor in the Fischell department of bioengineering and the Institute for Systems Research. "But the viscous forces that the fluid flow applies scale with the diameter of the particle. At the nanoscale, fluid flow has a greater effect on the particle than competing techniques, allowing us to move, guide and immobilize the quantum dot more easily and accurately."
This technique gives researchers the ability to manipulate a single dot precisely, guiding it quickly to desired locations, and holding it in each position with nanometer accuracy so it can be used to scan objects. The dot's response to each scanned object is measured, providing information about the object's electromagnetic fields with nanoscale resolution. Since nothing mechanical touches the quantum dot or affects its interaction with the objects it scans, the images produced are distortion-free, clean and sharp.
A Superior, Less Expensive Technique
"The new technique is more versatile, easier to implement, and more accurate by an order of magnitude than conventional near-field scanning optical microscopy," says Shapiro's colleague, Associate Professor Edo Waks, Department of Electrical and Computer Engineering and Institute for Research in Electronics and Applied Physics. "Basically, we can take a microscope, add a disposable microfluidic device, and beat the capabilities of an NSOM at a fraction of the cost and complexity.
"An undergraduate could build the basic two-channel microfluidic device used in the process, using standard soft-fabrication techniques, in less than an hour for under $50," he adds.
The UMD team is hoping to package all of the necessary system components into an inexpensive add-on product for microscopes.
In addition to Shapiro and Waks, research team members and co-authors are: Professor John Fourkas (department of chemistry and biochemistry and Institute for Physical Science and Technology), Ph.D. students Chad Ropp (Electrical and Computer Engineering) and Zachary Cummins (Bioengineering), and alumnus Sanghee Nah (Ph.D., '12, chemistry).
February 19, 2013
Researchers Achieve Breakthrough in Nanoprecision Imaging
Division of Research
University of Maryland
College Park, MD 20742-1541
University of Maryland
College Park, MD 20742-1541
© Copyright 2021 University of Maryland
Did You Know
With $1.1 billion in annual research expenditures, the University of Maryland research enterprise ranks 8th among all U.S. public institutions.